Best First Aid Kits for Jobsites

The jobsite first aid kits to buy, in order

Top pick: First Aid Only 90566. It is a Class B, Type III kit in a weatherproof plastic case. First Aid Only rates it for 50 people, and Staples lists it at 199 pieces for about $98. For a crew working outdoors it covers the most for the least money.

Get First Aid Only 90566

For crews already on PACKOUT: Milwaukee 48-73-8430C. Milwaukee rates this 193-piece kit to ANSI Z308.1-2015 Class B, Type III, with an IP65 weather seal and an impact-resistant body. It also locks into a PACKOUT stack. Retailers list it at about $155, so it costs about $57 more than the 90566 for the same class and type.

Get Milwaukee 48-73-8430C

Small PACKOUT crew: Milwaukee 48-73-8435C. This is the 79-piece Class A, Type III version in the same case design, at about $85-90.

Get Milwaukee 48-73-8435C

Truck or small-crew budget pick: First Aid Only 90753. It is a 25-person Contractor ANSI A+ kit with 126 pieces in a weather-resistant plastic case that First Aid Only labels Type III. It weighs about 1.63 lb and lists at about $58.

Get First Aid Only 90753

Job trailer or shop wall only: First Aid Only 90639. It is a 50-person ANSI A+ kit with 183 components in a plastic case with dividers, at about $41-58. Its listings do not claim the Type III weatherproof rating, so it does not belong in a truck bed.

Get First Aid Only 90639

How the picks were chosen: class, type, crew size, refills, price

None of these kits was tested. The picks come from the makers’ published ratings and contents lists, from retail listings and from the text of the standards. The ranking rests on six things, in this order of weight.

First Aid Only 90566: the Class B kit most crews should buy

The First Aid Only 90566 wins because it gives a crew the Class B fill in a Type III weatherproof case, at roughly two-thirds the price of the branded tool-system kits. First Aid Only describes the case as weatherproof and portable, with a carry handle and wall mount, and suggests it for work vans. The fill matches the 2015 Class B quantities: 50 adhesive bandages (1 x 3 in), 50 BZK antiseptic towelettes, 2 burn dressings (4 x 4 in), 2 cold packs (4 x 5 in), two 2 in and one 4 in conforming gauze rolls, and a CPR face shield.

It suits a general contractor or sub who runs crews of 10 to 50 and wants one kit per site or per truck that settles the Class B question. It does not suit a two-person service van. That crew carries more weight and more items than it will use, and the First Aid Only 90753 below serves it better.

The main limit is the edition. First Aid Only labels the 90566 “ANSI 2015 Compliant”. The 2015 minimum fill has no foil blanket, which the 2021 edition made mandatory in both classes, and the 2021 edition also raised the hand sanitizer count. First Aid Only also sells a 2021-labeled 50-person Class B kit, part number 91332, which lists at $177 on the maker’s site. The extra money buys the 2021 fill, including an emergency blanket, a windlass tourniquet and 20 hand sanitizer packets (210 pieces in all), in a weatherproof Type III case of the same listed size.

Refills are simple. First Aid Only sells refills by individual item, so a crew restocks only what it used and does not have to buy a new kit.

Milwaukee 48-73-8430C and 48-73-8435C: the PACKOUT versions

The Milwaukee 48-73-8430C is the Class B kit for crews whose trucks already carry PACKOUT. Milwaukee lists it as meeting ANSI Z308.1-2015 Class B, Type III. The housing has an impact-resistant body, an IP65 weather seal, heavy-duty latches, reinforced hinges, a clear lid, and bins that seal so small items cannot migrate between them. Milwaukee says the IP65 rated weather seal protects bandages, adhesives, antibiotics, and other essential medical supplies from rain and other jobsite debris. Milwaukee’s contents list includes 50 adhesive bandages, two 1/2 in x 5 yd rolls of adhesive tape, 25 antibiotic ointment packets and 50 BZK wipes. Grainger lists the housing depth at 15-3/16 in.

Buy it if the kit has to ride in a PACKOUT stack, where it locks to a rolling box and will not slide around a truck bed. Do not buy it for the case alone. Milwaukee still rates it Type III, not Type IV, so the extra $57 or so over the First Aid Only 90566 buys PACKOUT fit, an impact-resistant body and an IP65-rated seal, not a higher container rating.

The Milwaukee 48-73-8435C is the Class A, Type III version, with 79 pieces in the same housing design. Milwaukee’s list gives 16 adhesive bandages, two 1/2 in x 5 yd tape rolls, 10 antibiotic ointment packets and 10 BZK wipes, which are the Class A quantities. It suits a PACKOUT user running a crew of three to five doing finish work, trim or service calls. It does not suit framing or steel work, because Class A carries no tourniquet and no splint.

Older stock can turn up under part numbers without the C. Milwaukee lists the 48-73-8430 as a 204-piece Class B, Type III kit, and Milwaukee’s launch announcement describes the 48-73-8435 as a 76-piece Class A, Type III kit. The current C-suffix kits are the 193-piece and 79-piece versions.

First Aid Only 90753 for the truck; why the 90639 stays in the trailer

The First Aid Only 90753 is the budget pick for a work truck. First Aid Only sells it as a Contractor ANSI A+ kit for 25 people, with 126 pieces in a weather-resistant plastic case that it labels Type III (its feature list also calls the case “type I & II”). The case has a carry handle and wall mount and weighs about 1.63 lb by one retailer’s listing. Its contents include 10 alcohol wipes, scissors, tweezers, a first aid guide, 4 nitrile exam gloves, a 40 x 40 x 56 in triangular sling and a 4 x 5 in cold compress. At about $58 it is the cheapest kit here that its maker labels Type III. It suits an owner-operator, an electrician’s van or a two-to-four-person crew doing lower-risk work. It does not suit a site with saws, steel or heights, which needs Class B.

The First Aid Only 90639 carries more for less: an ANSI A+ fill rated for 50 people, with 183 components, often listed around $41-58. The catch is the case. Its listings describe a plastic case with dividers and a wall mount, with no Type III weatherproof claim. OSHA’s construction rule, 29 CFR 1926.50(d)(2), requires kit contents to be in a weatherproof container with each type of item individually sealed. Hang the 90639 in a job trailer, office or shop, and keep a Type III kit in the truck.

Class A or Class B, Type III or Type IV: what the labels mean on a jobsite

The class decides what is inside the kit. The type decides how well the case holds up. A Class A kit for one crew and a Class B kit for another can both be correct. A Class B kit in a Type II case left in an open truck bed is not.

In the 2015 edition, the Class B fill adds a 4 in roller bandage, a splint and a tourniquet, which Class A lacks. It also raises the consumables: 25 antibiotic and 25 burn treatment applications against 10 each, 4 pairs of exam gloves against 2, and 4 trauma pads against 2. A tourniquet matters where table saws, grinders, chain saws or sheet metal can open an artery. That is why a framing or steel crew should not settle for Class A, whatever the head count.

The four container types, from the 2021 edition:

Type IV kits are often built in gasketed Pelican cases and cost more than the Type III kits here. They make sense for a kit mounted outside a skid steer cab, on a utility body exposed to washdown, or on a boat. For a kit kept in a cab, a gang box or a PACKOUT stack, Type III is enough.

OSHA 1926.50, the 2026 edition, and keeping the kit full

OSHA’s construction standard, 29 CFR 1926.50, does not name a brand or a class. Its non-mandatory Appendix A points to ANSI Z308.1 as an example of minimally acceptable kit contents. The binding parts are these:

In practice, the weekly check is where most kits fail. The cold packs and burn gel get used first and are not replaced. Item-by-item refills, which First Aid Only sells, make the weekly restock cheaper than buying a new kit.

ISEA published ANSI/ISEA Z308.1-2026 on September 17, 2026. It keeps Class A and Class B and requires the first aid guide to be bilingual, in English and Spanish. It recommends keeping naloxone in or near kits and tightens tourniquet specifications. Hart Health’s stocking guide notes that the edition flags counterfeit tourniquets as an active problem, so replace a used or expired tourniquet with one from a known supplier, not an unbranded listing. First Aid Only states that its 2021 kits move to the 2026 fill with unchanged part numbers, and that 2026-compliant shipments begin in January 2027 or sooner. A First Aid Only 90566 or First Aid Only 90753 bought now may therefore ship under an older label than one bought next spring.

What is not worth the money

FAQ

Does OSHA require a Class B first aid kit on a construction site?

No. 29 CFR 1926.50 requires adequate, easily accessible supplies in a weatherproof container with individually sealed packages, checked before each job and weekly. Its Appendix A points to ANSI Z308.1 as an example of minimally acceptable contents. The employer picks Class A or Class B based on crew size and hazards, and crews running saws, grinders or steel should carry Class B for the tourniquet and splint.

Is a kit labeled ANSI 2015 or 2021 still usable now that Z308.1-2026 is out?

The class and type system did not change, so a Type III Class B kit is still a Type III Class B kit. A 2015 fill lacks the foil blanket that the 2021 edition made mandatory, and the 2026 edition calls for a bilingual English and Spanish first aid guide. First Aid Only states that its kits move to the 2026 fill under the same part numbers, with shipments starting in January 2027 or sooner.

How many first aid kits does a 30-person jobsite need?

Z308.1 does not set a number of workers per kit; “25 person” and “50 person” are the makers’ labels. First Aid Only rates the 90566 for 50 people, and says to match kit class, quantity and placement to the risks at each site, not the number of people. Spread-out sites, multiple floors or crews working far from the trailer need more kits, placed so each crew can reach one quickly. 1926.50 says larger or multiple operations at one location should assess the need for additional kits.