Best Work Gloves for Landscapers

What landscapers need from a glove, and the pick that covers it

Landscapers wear out gloves in a different way from framers or warehouse crews. One day can take in mulch and pine bark, a trailer of wet sod, shrub planting, hedge cleanup, string-trimmer line changes and a few irrigation fittings. That sets five demands, and they decide the picks below. Thorns and splinters have to stay out of the palm and fingertips. Grip has to hold on a wet shovel handle or a muddy root ball. Fingers have to bend well enough to tie a tree stake or thread a drip fitting. The back of the hand has to let sweat out from May to September. And the price has to make sense when a crew goes through pairs every few weeks.

The one to buy for most landscapers is the Ironclad Ranchworx (style RWG2). It has a goatskin grain leather palm, Kevlar reinforcement in the wear areas, Ironclad’s patented Rolltop fingertips and a nylon back, and Ironclad states the leather is machine washable. It meets four of the five demands, though Ironclad rates its wet grip at only 3 out of 5. Its cost is the price, which typically runs about $32-45 a pair in retail listings.

Get Ironclad Ranchworx

These picks were not tested. The choices come from what the makers publish for each exact model (materials, construction, EN 388 ratings, sizing) and from retailer listings.

Top pick: Ironclad Ranchworx for all-day crew work

The Ironclad Ranchworx wins on thorn protection and dexterity together, and few gloves manage both. Goatskin is the leather glove makers use when they want a thin, supple palm that still resists punctures. It lets a landscaper feel a zip tie or a hose clamp, where a thick cowhide driver glove would not. Ironclad reinforces the thumb saddle with DuPont Kevlar.

The fingertips are where most landscaping gloves fail. Ironclad fits it with its patented Rolltop fingertips, which Ironclad says are for ultimate dexterity (Ironclad lists US Patents D514,771 and 7,287,285 for the glove). The back is nylon, which breathes far better than a full-leather glove on a summer afternoon.

Washing matters on a landscaping crew because mulch dye, fertilizer dust and wet clay all end up in the leather. Ironclad states that its Bullwhip leather will not dry out or shrink when washed and lists the Ranchworx as 100% machine washable, to hang dry. Most cowhide gloves turn stiff after a soaking. Ironclad’s California notice for this leather glove warns of cancer and reproductive harm from chromium (hexavalent compounds) exposure.

Sizing runs from Small to 3XL (SKUs RWG2-02-S through RWG2-07-XXXL). Ironclad sizes by hand width: Large fits a palm about 3.4-3.9 inches across. Ironclad’s chart says a worker between sizes should size down for a snug fit.

Who should not buy it: a crew member who spends the day laying sod or setting irrigation in standing water. Leather of any kind will eventually soak through. That person is better served by the rubber-coated Showa below, at a fraction of the price.

Best value leather: Wells Lamont HydraHyde 3207

The Wells Lamont HydraHyde 3207 is the leather glove for crews buying on budget and for anyone who starts work in dew-soaked lawns. It typically sells for about $20 a pair in retail listings, around half the price of the Ranchworx. Wells Lamont builds it with cowhide leather, reinforced leather fingertips, a spandex back, lightly padded neoprene knuckles and an adjustable wrist closure. Its HydraHyde leather is specially tanned to resist water, and Wells Lamont names landscaping among its uses.

Get Wells Lamont HydraHyde 3207

Water resistance is the reason to choose it. Untreated cowhide picks up water from wet grass and hardens as it dries, and the next morning’s pair is stiff and cracks at the finger joints. HydraHyde leather is tanned to slow that down. That is the right trade for crews mowing and edging at 7 a.m. Water-resistant is not waterproof, though, so a full day of hosing out a pond liner will still soak it.

The trade-offs against the top pick are clear. Cowhide is thicker than goatskin, so threading a drip emitter is harder. The spandex back breathes and stretches, but it gives no thorn protection on the back of the hand, which matters when reaching into a barberry or holly hedge. The neoprene knuckle padding helps against the knocks of loading pavers and stone.

Wells Lamont publishes its size chart by hand length and circumference. Medium fits a hand 8-8.5 inches long and 7.5-8.5 inches around. Wells Lamont’s 3207 page offers it in Medium, Large, XL and XXL. Choose it over the Ranchworx when pairs get lost or wrecked fast and the crew mostly mows, edges and hauls.

Best for wet sod, mulch and digging: Showa Atlas 300

For the wettest jobs, a rubber-coated knit beats leather, and the Showa Atlas 300 is the long-standing choice. SHOWA coats the palm and fingers in natural rubber latex with a rough finish over a seamless knit liner and leaves the back open to the air. SHOWA says the rough-textured natural rubber palm coating provides maximum grip and dexterity, and that the latex coating protects the hand in damp environments. The open back lets sweat out, which full-dip rubber gloves do not.

Get Showa Atlas 300

It suits the laborer on a sod crew, the person spreading mulch by hand and anyone digging planting holes in wet clay. Rubber-coated knits are cheap enough to treat as consumables, and that is the right way to use them on a crew. Rotate them before the coating wears through at the fingertips, which happens first on gravel and stone work.

Who should not buy it: anyone with a natural rubber latex allergy, because the coating is natural rubber latex. SHOWA warns it may cause latex allergies and that medical aid should be sought immediately in the case of an allergic reaction. That person should use the nitrile-coated Showa Atlas 370 below. It is also the wrong glove for thorny shrubs and bramble cleanup. SHOWA says not to use it where there are chemical, electrical, thermal or entanglement risks, and its performance levels apply to the coated surface only. A thin knit liner under a rubber skin stops dirt and abrasion, not a rose cane or a hawthorn spine.

Get Showa Atlas 370

Best for planting and irrigation fittings: Showa Atlas 370

The Showa Atlas 370 is the glove for detail work: setting plugs and annuals, threading drip line, tightening hose clamps and handling irrigation controller wiring. SHOWA describes it as a smooth-grip nitrile palm coating on a seamless knit nylon liner, an ultra-light weight, elastic low-lint glove. It is lightweight, and SHOWA says its nitrile coating resists oil and abrasion. SHOWA lists handling plants and vegetables, planting and repotting, and harvesting among its applications. SHOWA lists intricate parts handling among its applications.

Its EN 388:2016 rating is 4121X. That means abrasion level 4 (the top level), blade cut 1 on the coup test, tear 2 and puncture 1, with the ISO cut test not performed. The abrasion figure explains why the coating outlasts most cheap dipped gloves when handling bark and pots. The puncture level of 1 is the honest warning: this glove does not stop thorns.

The smooth finish is the second limit. SHOWA lists its grip as smooth, and a smooth nitrile palm on a soaked tool handle grips less well than the rough rubber of the Atlas 300. Keep it for planting and fittings, not for wet digging. SHOWA says not to use gloves that show signs of wear and not to wear them when there is a risk of entanglement by moving parts of machines. It is also inexpensive: industrial suppliers list the 370B at about $4.39 a pair by the dozen.

For roses, barberry and bramble cleanup: Magid HandMaster BE195T

No everyday glove protects the forearm, and thorny shrub cleanup goes past the wrist. The Magid HandMaster BE195T is a gauntlet that Magid sells as a thorn-resistant rose pruning glove with an extra-long forearm cuff. Its palm, cuff, knuckle strip and fingertips are synthetic suede over a spandex-infused stretch back, and the extra-long cuff extends protection up the arm. That is the part a short glove leaves bare when reaching into a rose bed, a pyracantha hedge or a blackberry thicket.

Get Magid HandMaster BE195T

Treat it as a task glove, kept in the truck for those jobs, not a crew’s all-day pair. Magid’s California notice warns it may contain a chemical known to the State of California to cause cancer, birth defects or other reproductive harm. Magid sells the BE195T as a women’s rose pruning glove, so larger-handed crew members may find it short in the fingers. A gauntlet’s long cuff is also warm in summer and clumsy with a pruning saw. Use it for the half hour of thorny work and switch back to the Ranchworx or the HydraHyde for the rest of the day.

Who should skip it: crews that rarely touch thorny ornamentals. For occasional rose pruning, the goatskin palm of the Ranchworx plus long sleeves covers most of the risk without buying another glove.

Reading glove ratings, and what is not worth the money

Many glove packs carry an EN 388 shield with four digits and a letter. The digits are abrasion (0-4), coup blade cut (0-5), tear (0-4) and puncture (0-4), and the letter is the ISO 13997 cut result (A-F, or X when not tested). The puncture figure comes from a blunt stylus, not a fine needle. EN 388 itself states that it does not cover hypodermic needles, so a high puncture digit does not guarantee protection from a thin cactus spine. In the U.S., ANSI/ISEA 105 rates cut A1-A9 and has a separate needle-puncture test with a 25-gauge needle. A landscaper worried about thorns should weigh leather thickness and fingertip construction above the puncture digit.

Two purchases are not worth the money for landscaping. Plain cotton string-knit gloves sold in 12-packs soak through on the first wet lawn and give no thorn protection. Lined winter leather gloves bought as year-round gloves are miserable from June on. A cut-rated glove of A4 or above is also overkill for planting and mulching. Keep cut-rated gloves for crews handling sheet-metal edging or sharpening mower blades.

A practical setup for a landscaping crew is two gloves per person: a leather pair (Ranchworx, or HydraHyde on a tighter budget) and a coated knit (Atlas 300 for wet work, Atlas 370 for detail), with a gauntlet in the truck. A crew member who also does hardscape and site-construction work should compare these with the best work gloves for construction, where impact protection on the back of the hand matters more.

FAQ

Are goatskin or cowhide gloves better for landscaping?

Goatskin is thinner and more supple, so it gives better finger feel for planting and fittings while still resisting thorns, which is why the Ironclad Ranchworx uses it. Cowhide, as in the Wells Lamont HydraHyde 3207, is thicker and cheaper but less dexterous. Both will eventually soak through in standing water.

Do rubber-coated gloves stop thorns?

No. A coated knit such as the Showa Atlas 370 carries an EN 388 puncture level of 1, the lowest passing level, and a thin knit liner offers little resistance to a rose cane or hawthorn spine. Use coated knits for wet digging, mulch and planting, and wear leather or a gauntlet for thorny shrubs.

What should a worker with a latex allergy wear?

Avoid natural rubber latex coatings such as the Showa Atlas 300. The Showa Atlas 370 uses a nitrile coating instead, and the leather picks carry no rubber coating on the palm. Check the coating material on any replacement glove before buying it.