Flame resistant clothing is not optional equipment in oil and gas, electrical utility, petrochemical, and many industrial environments — OSHA requires arc-rated clothing for electric power workers whenever estimated incident energy exceeds 2.0 cal/cm² (29 CFR 1910.269(l)(8)(v)), and expects employers to provide FR clothing where a hazard assessment finds flash fire exposure (29 CFR 1910.132). But not all FR clothing is equal. The difference between cheap FR that feels like wearing a cardboard box and modern FR that moves, breathes, and fits like regular workwear is significant — and that difference determines whether your crew actually wears it properly every shift.

We compared FR clothing lines on their makers’ published arc ratings, fabrics and prices, and ranked the five best FR clothing brands for 2026.

Best FR Clothing at a Glance

Brand/LineFabric WeightWash DurabilityPrice Range
Ariat FR M4 DuraStretch13 ozNot stated by Ariat$75-$95
Carhartt FR Force Cotton6.75 ozNot stated by Carhartt$50-$80
Wrangler FR Riggs14.75 oz jean / 5.4 oz shirtNot stated by Wrangler$50-$85
Bulwark iQ Series6.9 oz (Lightweight FR Pant)Not stated by Bulwark$55-$85
LAPCO FR Advanced7 ozNot stated by LAPCO$35-$55

For more on protective gear comparisons, see our Carhartt vs Dickies brand analysis.

Detailed Reviews

Ariat FR M4 Relaxed DuraStretch — Best Overall FR Clothing

Ariat started in performance western and equestrian boots, and its FR M4 Relaxed DuraStretch jean uses 98% cotton, 2% spandex stretch denim that Ariat says helps deliver unrestricted movement through tough, active work.

Ariat lists its FR M4 Relaxed DuraStretch jeans as 13 oz stretch denim, 98% cotton and 2% spandex, and says DuraStretch fabric helps deliver unrestricted movement through tough, active work. Ariat rates the 13 oz stretch denim at 19 cal/cm² and CAT 2. It meets NFPA 70E/ASTM F1506 performance requirements and is UL classified to NFPA 2112.

Ariat lists strategically reinforced belt loops, a no-rub comfort inseam and heavy-duty zipper and hardware.

Ariat lists this FR M4 Relaxed DuraStretch jean in Standard and Big & Tall fits. This is FR clothing you do not mind wearing — which is the whole point, because FR protection only works if people actually wear it.

Pros:

Cons:

Get Ariat FR M4 DuraStretch

Carhartt Flame Resistant Force Cotton — Best FR for Durability

Carhartt’s FR Force Cotton line brings Carhartt Force sweat-wicking, fast-drying technology to flame resistant workwear. Carhartt describes the FR Force tee as 6.75-ounce, 100% cotton FR jersey: a lightweight, fast-drying, odor-fighting FR t-shirt.

The 6.75 oz fabric carries NFPA 2112/CAT 2 labels, meets the performance requirements of NFPA 70E and is UL classified to NFPA 2112. The Force technology adds sweat-wicking, fast-drying and odor-fighting properties to the FR cotton, which Carhartt says is engineered to fight sweat and dry fast so you stay cool and comfortable.

Carhartt lists side-seam construction that minimizes twisting and a rib-knit crewneck that holds its shape.

Carhartt says that at under seven ounces this FR shirt is light enough to keep you moving through warm weather.

Pros:

Cons:

Get Carhartt FR Force Cotton

Wrangler FR Riggs Workwear — Best Value FR Clothing

Wrangler’s FR Riggs line carries arc ratings that vary by garment, from ATPV 22 cal/cm² on the FR Relaxed Fit Jean to 9.5 cal/cm² on the Riggs Twill Solid Work Shirt (CAT2; Cat 3 requires at least 25 cal/cm²). Wrangler’s FR Relaxed Fit Jean ($84.99 at Wrangler) costs about a third less than Ariat’s FR M4 DuraStretch jean ($124.95-$129.95 at Ariat) but more than LAPCO’s $49.95 outlet shirts.

Wrangler lists the FR Relaxed Fit Jean as 14.75 oz 100% cotton flame resistant denim, and the Riggs Twill Solid Work Shirt as 5.4 oz FR twill of 50% FR viscose, 33% meta aramid, 10% nylon, 5% para aramid and 2% anti-static fiber. Wrangler lists the jean as no-stretch. The room2move fit improves fit in the seat, thigh, knees and bottom leg opening and adds an action gusset for ease of movement ; Wrangler lists the jean itself as straight-leg with no stretch.

Wrangler rates these garments CAT2 (ATPV 22 cal/cm² on the jean, 9.5 cal/cm² on the twill shirt), so they do not reach Cat 3: if your hazard assessment calls for Cat 3, you need clothing or a layered system rated at least 25 cal/cm².

Pros:

Cons:

Get Wrangler FR Riggs

Bulwark iQ Series — Best Lightweight FR for Hot Climates

Bulwark’s iQ Series spans Comfort, Endurance and Mobility collections. Bulwark calls it FR workwear designed around the wearer instead of just the hazard, and the range includes lightweight garments. Bulwark lists the iQ Series Lightweight FR Pant at 6.9 oz, which Bulwark says is designed to keep you cool and in command all day long.

Bulwark rates the iQ Series Lightweight FR Pant at ATPV 9 cal/cm² (CAT 2). That meets NFPA 70E’s 8 cal/cm² minimum for PPE Category 2 but not Category 3 (25 cal/cm²) or Category 4 (40 cal/cm²); NFPA 70E-2024’s equipment table puts 600 V-class switchgear in Category 4. If your hazard analysis requires ratings above 9 cal/cm², you will need to layer or choose a heavier garment. Bulwark defines CAT 2 as an arc-rated FR long-sleeve shirt and FR pants, or an FR coverall, with a minimum arc rating of 8 cal/cm².

Bulwark notes that NFPA 2113 requires FR garments to cover the upper and lower body and flammable underlayers as completely as possible: wear a coverall, or a certified shirt together with certified pants.

Pros:

Cons:

Get Bulwark iQ Series

LAPCO FR Advanced Comfort — Best Budget FR

LAPCO no longer lists the FR Advanced Comfort line on lapco.com; its LAPCO Factory Outlet Store still sells remaining Advanced Comfort (UltraSoft AC) uniform shirts. At $35-$55 per garment, LAPCO’s factory outlet lists these Advanced Comfort shirts at $49.95, with some sizes on sale at $35.00.

LAPCO’s outlet lists the Advanced Comfort uniform shirts as 7 oz 88/12 fabric, UL Classified to NFPA 2112 and ASTM F1506.

LAPCO’s strength is selection. They manufacture FR shirts, jeans, coveralls, overalls, bibs, outerwear, and hi-vis options. The outlet’s Advanced Comfort stock includes ladies’ shirts and pants in Misses and Women’s sizes.

LAPCO lists four rows of lock stitching on the front placket of these shirts.

Pros:

Cons:

Get LAPCO FR Advanced Comfort

Understanding FR Ratings and Standards

ATPV and Arc Rating

ATPV (Arc Thermal Performance Value) measures the incident energy a fabric can absorb before the wearer has a 50% probability of receiving a second-degree burn. The unit is calories per square centimeter (cal/cm²). Higher numbers mean more protection.

NFPA 70E calls these arc flash PPE categories, each with a minimum arc rating: 4 cal/cm² (Cat 1), 8 cal/cm² (Cat 2), 25 cal/cm² (Cat 3) and 40 cal/cm² (Cat 4). Examples of equipment NFPA 70E-2024 assigns to each:

HRCTypical Hazards
Cat 1Working on energized 120V/208V panels
Cat 2Panelboards and other equipment over 240 V up to 600 V, and 600 V-class MCCs (65 kA max, 2-cycle clearing)
Cat 3No AC equipment in NFPA 70E-2024’s table; DC supplies 150-600 V with 3-7 kA available fault current
Cat 4600 V-class switchgear and switchboards, 600 V MCCs with 20-cycle clearing, and 1-15 kV metal-clad switchgear

Ariat, Carhartt, Wrangler and Bulwark rate the garments cited here CAT 2. Bulwark defines CAT 2 as a minimum arc rating of 8 cal/cm², and its iQ Series also includes CAT 1 items, so check each garment’s label.

Inherent vs Treated FR

Inherent FR is built into the fiber itself — the flame resistance cannot wash out, wear off, or be compromised by chemical exposure. Examples: Nomex, Kevlar, modacrylic blends. Inherent FR is more expensive but provides guaranteed protection for the life of the garment.

Treated FR is a chemical finish applied to a standard fabric (usually cotton). The FR property is durable and maintains certification through the garment’s rated wash life, but it can be degraded by bleach, fabric softener, or contamination. Treated FR is less expensive and typically more comfortable than inherent FR.

Fabrics differ by garment: Wrangler’s Riggs Twill Solid Work Shirt, for example, is an FR viscose/aramid blend rather than cotton. Choose by the arc rating and certifications your hazard assessment calls for, and launder per the garment’s care label.

FR Clothing Care Tips

For hi-vis options, see our best hi-vis work jackets guide. For broader brand comparisons, see Carhartt vs Dickies.

Published March 29, 2026 · Last updated: November 19, 2026