Best Heated Work Gloves
The pick: Fieldsheer Ranger V2 Heated Glove for wet, cold work
Buy the Fieldsheer Ranger V2 Heated Glove when the work is wet: snow removal, dock and yard work, or pouring and finishing in late fall. Fieldsheer, which sells it under its Mobile Warming name, builds it from goatskin leather. It has a reinforced anti-slip palm and a Hipora breathable waterproof barrier behind the leather, and its Powersheer heating runs around the fingers. Retail listings at The Warming Store and Kohl’s put it at about $190-200, in sizes XS, S, M, L, XL, XXL and 3XL. That is the widest size range on this list.
Get Fieldsheer Ranger V2 Heated GloveThe gloves were picked on six points, in this order: whether the heat reaches the fingers or only the back of the hand, the runtime the maker states, grip and abrasion resistance on the palm, waterproofing, touchscreen fingertips, and price. These picks were not tested. The ranking rests on the makers’ published specifications.
The ranking, and who should buy each one instead of the top pick:
- Fieldsheer Ranger V2 Heated Glove: wet work. Goatskin with a Hipora waterproof barrier, sizes XS to 3XL, up to 8 hours.
- ActionHeat 7V Rugged Leather Heated Work Gloves: snow and slush. The fingers and thumb are heated and there is a waterproof membrane.
- Ororo Glasgow Pro Heated Waterproof Gloves: fine finger work and phone use, up to 8.5 hours.
- Ororo Calgary Heated Gloves: the longest stated low-setting runtime here, but only water resistant.
Why the Fieldsheer glove leads, and who should skip it
The Ranger V2 answers the first four points on that list in one glove. Fieldsheer says its Powersheer heat system runs around the fingers and thumb and over the top of the hand. It gives the goatskin a reinforced palm for grip and durability, pads the knuckles and back of the hand, and puts a Hipora breathable waterproof barrier behind the leather. Fieldsheer also lists the glove as touch screen compatible.
Power comes from Fieldsheer’s 7.4-volt system; Fieldsheer says to remove the battery before washing the gloves. Fieldsheer says its heated apparel is not recommended for pregnant women or anyone with a known heart condition and that unattended children should not use it. It warns that people with diabetes are less sensitive to heat, which could result in a burn, that prolonged contact and pressure between the heating panel and skin could cause burns, and says to discontinue use immediately at any sense of discomfort. The Ranger V2 ships with two Powersheer Mini 2250mAh 7.4V Li-Ion batteries, one for each hand. Fieldsheer states up to 8 hours of power per charge for the Ranger V2: 2+ hours on high, 3+ on medium-high, 4+ on medium-low and 8+ on low. How long a single charge lasts depends on the setting you run. Plan on the low setting if you need a full shift, and carry a spare pair of batteries for a 10-hour day; the kit includes one pair, and Fieldsheer sells a Powersheer Mini 2-pack separately.
Who should buy something else: Fieldsheer lists four heat settings from 90° up to 135°, while ActionHeat states that its 7V gloves reach up to 150°F on high, so if you want more heat on the top setting, look at the ActionHeat 7V below. If you need the longest stated runtime, Ororo rates both of its gloves at up to 8.5 hours, and for fine finger work the thinner Ororo Glasgow Pro is the better fit.
ActionHeat 7V Rugged Leather Heated Work Gloves: most heat in the fingers
The ActionHeat 7V Rugged Leather Heated Work Gloves are for people whose fingertips go white first. ActionHeat lists the heated zones as the fingers and thumb, not just the back of the hand. It pairs a leather outer shell with a waterproof membrane and includes 2 batteries. The Warming Store and Macy’s list it at about $190, in black or yellow, sizes S to XXL.
The trade-off is runtime. ActionHeat states “up to 5+ hrs on Low”. That is the shortest stated figure on this list, against Fieldsheer’s up to 8 hours and Ororo’s up to 8.5 hours. ActionHeat states that its 5V and 7V rechargeable gloves both reach up to 150°F on high, and lists this glove at 2+ hours on high, 3+ on medium and 5+ on low. For a full outdoor shift in snow, buy a spare battery set and swap at lunch. Keep the batteries dry: ActionHeat says batteries must not contact water or other liquids, and if liquid gets into one, unplug it immediately, because continued use may result in fire or electrical shock. ActionHeat also says not to store them below -4°F or above 120°F, and does not recommend machine washing heated gloves.
ActionHeat warns: do not use its heated products while sleeping or unconscious; unattended use on children or incapacitated persons may be dangerous; they may cause burns or discomfort, so consult a physician first with sensitive skin or any medical condition affecting circulation or skin sensitivity; and if you feel discomfort or overheating, remove the product immediately and unplug all wires and power packs. Who should buy something else: anyone who needs heat for 8 hours without swapping, or who works with phones and fasteners. The yellow leather is a good work color, but this glove makes no touchscreen claim in the listing summarised here. The Ororo Glasgow Pro does.
Ororo Glasgow Pro Heated Waterproof Gloves: dexterity and touchscreen use
The Ororo Glasgow Pro Heated Waterproof Gloves are the pick for electricians, inspectors, surveyors and delivery drivers who need to feel a screw head or use a phone without taking the glove off. Ororo describes them as lightweight, waterproof, windproof and flexible. They give up to 8.5 hours of back-of-hand and finger heating, with a battery indicator and a heat-level indicator on the glove. The index finger, middle finger and thumb are 50% PU and 50% nylon for touchscreen use, which covers three fingers where most gloves cover one or two. A promotional-products listing at Merchology shows them from about $150.
The battery sits in a pocket built inside the glove, and connecting clips keep the pair together. The Glasgow Pro comes with two B25A batteries (2200mAh, 7.4V) and a battery charging cable.
Who should skip it: anyone carrying block, rebar or rough-sawn lumber. A thin, flexible waterproof shell is the reason this glove is dexterous; for hauling, the goatskin Ranger V2 with its reinforced palm or the leather ActionHeat 7V is the better fit. Use the Glasgow Pro for light, precise work.
Ororo Calgary Heated Gloves: longest stated runtime on low
The Ororo Calgary Heated Gloves suit a long, cold, mostly dry shift where the heat stays on low all day: gate and traffic control, equipment operation, or yard checks. Ororo rates them at up to 8.5 hours: 3 hours on high, 4 on medium and 8.5 on low. Heat runs across the edges of all five fingers and the back of the hand. The kit includes two B22A rechargeable batteries (2000mAh, 7.4V) and a USB-A to dual micro-USB cable, so one charger port feeds both gloves.
The pre-curved fingers are goatskin and the palms are reinforced Taslan with non-slip pads. The thumb and index finger work on touchscreens, and an LED shows charge level. Ororo states a 1-year limited warranty on the heating elements and on the battery, plus 30-day returns.
Why it ranks last for work: Ororo calls the Calgary water and wind resistant, not waterproof. A wet day soaks it in a way the Ranger V2, ActionHeat 7V or Glasgow Pro are built to resist. Choose the Calgary for runtime in dry cold, not for slush.
Reading heated glove specs: voltage, mAh, zones and runtime
Voltage decides how hot the glove can get. The Fieldsheer and Ororo gloves run on 7.4V packs (Fieldsheer Powersheer Mini, Ororo B22A on the Calgary and B25A on the Glasgow Pro), and the ActionHeat on its 7V system. ActionHeat states that its 5V and 7V rechargeable gloves both reach up to 150°F on high.
Capacity (mAh) decides how long that heat lasts, at a given setting. Two 2000mAh, 7.4V packs hold about 14.8 watt-hours each. Every runtime on this list is the maker’s best case, and where the maker splits it by setting, the longest figure is for low: Ororo’s up to 8.5 hours on the Calgary falls to 3 hours on high. Cold also cuts battery output: Ororo says very low temperatures accelerate battery drain, and it recommends operating its batteries between 14°F and 86°F and charging them between 41°F and 113°F.
Zones decide where the heat goes. “Back of hand” heating warms the blood flowing to your fingers. Heating that runs down the fingers (Calgary’s five finger edges, ActionHeat’s fingers and thumb) warms the tips directly, and the tips are what go numb on a metal tool. If your fingers are the problem, rule out any glove that heats only the back of the hand.
Upkeep: Ororo warns that a battery left connected can drain even when the glove is switched off, so unplug both packs at the end of the day. Ororo also says to store its batteries at 50% charge or more if unused for over a week, and never to leave one completely drained for over a week. Ororo says to charge its batteries from a charger by a reputable brand with UL, CE or FCC certification, and that its lithium batteries must travel in carry-on luggage. Each glove has its own battery. A dead pack on one hand means a cold hand, so charge both together. The Calgary kit’s USB A to dual micro USB cable lets one charger port feed both Ororo batteries.
What is not worth the money
Do not pay for heat you will not use. If your hands only get cold during breaks, or the temperature stays above about 35°F, an insulated work glove with a waterproof insert keeps you warm with no battery to charge. See the best insulated work gloves for that. Heated gloves cost about $150-200 on the listings quoted here, so they only pay off when you work for hours below freezing.
Do not buy a glove that heats only the back of the hand if numb fingertips are your complaint. Do not buy a thin waterproof glove like the Glasgow Pro for hauling material; a leather glove such as the goatskin Ranger V2, with its reinforced palm, suits that wear better. And do not pay extra for a high setting you will run for long: ActionHeat does not recommend running its 100% setting for extended periods, because it can cause overheating or bodily discomfort. Ororo’s own figures show high giving about a third of the low-setting runtime (3 hours against 8.5). A glove that is warm enough on low for a full shift is a better buy than one that is hot for half of it.
Related guides
- 21° vs 30° Framing Nailers: Match the Angle, Collation and Nails
- Best ATV/UTV Tool Boxes and Cargo Racks (2026): For Farm and Ranch Work
- Best Balaclavas and Neck Gaiters for Cold Work
- Best Bib Overalls for Construction and Cold-Weather Work (2026)
- Best Leather Work Gloves
- Best Work Gloves for Landscapers
- Best Touchscreen Work Gloves
FAQ
How long do heated work gloves last on one charge?
Makers state best-case figures, mostly on the low setting. Ororo rates the Calgary and Glasgow Pro at up to 8.5 hours, Fieldsheer rates the Ranger V2 at up to 8 hours (8+ on low, 2+ on high), and ActionHeat rates its 7V leather work glove at up to 5+ hours on low. On high, Ororo’s figure falls to 3 hours, and freezing temperatures shorten every figure further.
Are heated work gloves waterproof?
Only some are. The Fieldsheer Ranger V2 has a Hipora waterproof barrier, the ActionHeat 7V Rugged Leather Heated Work Gloves have a waterproof membrane, and Ororo calls the Glasgow Pro waterproof. Ororo describes the Calgary as only water and wind resistant.